Foam-Control Insulation for Construction.
In the construction industry, Foam-Control is among the most versatile, energy efficient, and cost effective insulators available, delivering extremely high, stable R-values. Depend on Foam-Control to do the job—practically any job—from the ground up: perimeter foundation and underslab insulation, wall sheathing, EIFS insulation, roof insulation, concrete insulation/void filler, and ICF insulation.
Molded Polystyrene Insulation
Stands up to the elements, yet it’s good for the environment.
Cost effective thermal design is among the highest priorities in construction. Foam-Control insulation products are available in a range of densities necessary to provide energy efficiency, structural integrity, and cost effectiveness. They’re proven to lower energy costs, saving both money and precious resources.
Cost effective thermal design is among the highest priorities in construction.Thermal resistance (R-value) of an insulation assembly is the determining factor in thermal performance. Foam-Control provides optimum cost value when compared to other rigid insulations of the same R-value design.
Foam-Control insulation products are available in a range of densities necessary to provide both structural integrity and cost effectiveness. Other rigid insulation products fail to provide this design flexibility due to limited density availability, and therefore cost more.
An Architectural Insulation Like No Other
From frost line to roof line.
Foam-Control® PLUS+® is used in a wide range of critical insulation applications: Perimeter, Underslab, Cavity Wall, Wall Sheathing, Precast Concrete Core, Flat/Tapered Roofing, Vegetative Green Roof, Plaza Deck, Drainage Board, and Waterproofing Protection. All of these applications benefit from the exceptional physical properties and wide range of board thicknesses, sizes, and options available with Foam-Control PLUS+.
- Foam-Control PLUS+ provides more R-value at a lower cost
- XPS and Polyiso use blowing agents that cause R-value loss over time
- XPS has shown to take on moisture in building applications where water is present and has a low potential to dry
- Foam-Control PLUS+ has a superior drying potential
- Foam-Control PLUS+ is more vapor permeable to help avoid moisture problems
- Foam-Control PLUS+ available in 15, 25, 40, and 60 psi strengths
Foam-Control gives you control over the design of your project. You determine the shape and specs of the components you need, then NoArk works with you to custom fabricate your design by hot wire cutting with computer aided design (CAD).
Foam-Control is a cost-effective, durable, and energy efficient solution for cavity wall applications. It is an ideal material to stop energy loss in brick faced residential and commercial masonry and framed walls.
Foam-Control for poured-in place and precast concrete systems reduce the requirement for concrete and overall weight. Foam-Control can been used as: concrete sandwich panel cores, block-outs/knock-outs, void fillers, custom pattern forms, and more.
Foam-Control can been used as: concrete sandwich panel cores, block-outs/knock-outs, void fillers, custom pattern forms, and more. Foam-Control is a cost-effective, durable, and energy efficient solution for interior crawl space wall applications.
Foam-Control has superior moisture resistance, breathability, and stable R-value to protect your insulation integrity. It is an ideal material to stop energy loss through framing members.
Perimeter & Under-Slab
Foam-Control with Perform Guard® is a cost-effective, durable, and energy efficient solution for below grade insulation applications. It is an ideal material to stop energy loss at the foundation or slab. Foam-Control with Perform Guard is a proven material with built in protection against the destructive force of termites.
Foam-Control Protection Boards are economical, light weight and easy to install over foundation walls that have been damp-proofed or water-proofed with coatings/membranes. Installed prior to backfilling, Foam-Control Protection Boards provide impact puncture protection for foundation wall coatings/membranes from rocks and potential construction debris in backfill soil. Protection is also provided against crushed stone/gravel used in many foundation drainage designs. In cold regions, Foam-Control Protection Boards bond-break the soil from the foundation wall and as insulation reduces potential damage of freeze thaw cycling.
Radiant Floor Boards
Foam-Control is a cost-effective, durable, and energy efficient solution for insulation applications. It is an ideal material to stop energy loss. Foam-Control Radiant Floor Boards for use in radiant floor systems are provided in two configurations:
4’ x 4’ boards with 3” on center slots for fast installation of PEX tubing in hydronic radiant systems
4’ x 8’ flat sheets for use in electric radiant systems
Foam-Control T&G is a cost effective, durable and energy efficient solution for increasing the performance of stucco applications over framed walls. It is an ideal material to stop energy loss through framing members. Foam-Control T&G is available in a range of R-values to meet your local energy code requirements.
Insulation helps keep people comfortable. Unfortunately, insulations are susceptible to termite infestation. Foam-Control with Perform Guard is an important component in preventing this problem. It’s made by a process that incorporates a termite resistant additive into the insulation during the manufacturing process. The additive is registered with the Environmental protection Agency (EPA) for this application. Foam-Control with Perform Guard has been thoroughly tested, is safe for handling, and noncorrosive.
Foam-Control Nailbase consists of Exposure I rated Oriented Strand Board (OSB) and UL Classified Foam-Control rigid insulation. It is an ideal insulation and nailable surface for structural roof decks and walls. Stability and traffic resistance make Foam-Control Nailbase perfect for both residential/commercial roof decks and walls.
2-Ci is the ideal two-in-one continuous insulation (Ci) sheathing board. 2-Ci installs quickly over residential and commercial wood framing members using compatible pneumatic nail guns. Standard wall claddings such as wood, vinyl, stucco, cement boards, etc., and code required weather resistive barriers can be installed over 2-Ci.
Foam-Control Nailstrip consists of factory installed furring strips and UL Classified Foam-Control rigid insulation. It is an ideal insulation and nailable surface when applied over structurally sound walls such as poured concrete, concrete block, brick, wood and streel framing. Stability makes Foam-Control Nailstrip perfect for both residential and commercial wall applications.
Foam-Control Roof Insulations offer versatility for use in virtually all Roofing Membrane Systems. Foam-Control can by supplied as flat board stock, tapered, unfaced, or with factory applied facings or coverboards.
In the roofing industry, Foam-Control Roof Insulations are among the most versatile, energy efficient, and cost effective insulators available, delivering extremely high, stable R-values. Depend on Foam-Control to do the job as flat stock or tapered with labor-saving factory or field applied face laminates. Foam-Control is ideal for use in fully adhered, mechanically fastened, or ballasted TPO, PVC, EPDM, and other single ply membranes as well as modified bitumen and built-up roofing.